The Piping System

What type of pipe material does Vulcan treat?

Vulcan is suitable for all pipe materials: iron, galvanized iron, inox, copper, steel, stainless steel, plastic, PVC, PE-X, compound pipes (any material mixture) etc.

Do plastic pipes and copper pipes need scale protection at all?

Yes. Plastic and copper pipes are prone to calcifications, too. The smoother a surface is the longer it can resist the process of calcification. It may take longer until plastic or copper get a first layer of scale. However, once that first layer has built up, the scaling process proceeds just as fast as on any other surface or material.

How long does it take Vulcan to sanitize the pipes?

Vulcan gently removes scale and rust without negatively affecting the pipes. The treatment works within the laws of nature. Therefore, the removal process may take as long as it took the deposits to develop.

Will the scale that is cleaned out block the pipes?

No, the scale is slowly dissolved back into a solution and the calcium and magnesium is washed away in the water as a fine powder.

How long does the effect last?

When mono-crystals are created by the impulse variation, it is important that they grow as long as possible before they start their way through the piping system. The larger the crystals, the longer it takes until the crystals fall apart again and eventually "die". In warm water, these crystals grow faster and therefore are stronger and live longer. This explains why the Vulcan-effect lasts the longest in warm water (up to seven days) and shorter in cold water (approx. two days).

The copper pipes have turned green. Does Vulcan help with this problem?

Green colored copper pipes are an indication to oxidized copper or copper rust - similar to rust in iron pipes. The Vulcan treatment produces hydrogen dioxide (H2O2) which protects blank copper surfaces against oxidation. This way, Vulcan reduces the green colorization of the water.

---

The Water Quality

How do I know the water hardness of my water?

Your local waterworks provides detailed information on the chemical composition of your water. It lists the calcium and magnesium content and usually provides information on hardness in GPG (grains per gallon) or in PPM (parts per million).

Up to which degree of water hardness can Vulcan be applied?

Vulcan operates within a high performance frequency range and is the only unit with a 24 Volt technology. It can thus be successfully applied to problems with a very high degree of water hardness. Vulcan has successfully treated cases with a water hardness of 900 ppm (~ 53 PGP) and more.

Does the Vulcan treatment have a softening effect on the water?

The treatment does not change the overall water hardness. Unlike in chemical water treatment systems (e.g. a water softener that uses salt) the water treated by Vulcan does not lose minerals, such as calcium and magnesium. The natural composition of the elements in the water remains the same. However, due to a change of the water surface tension your skin will feel remarkably softer. You are sure to feel this effect when taking a shower or even simply washing your hands. Most importantly, scale loses its adhesive characteristic. The treatment does not, however, change the measured water hardness. On a chemical level you have the same hardness before and after the treatment.

---

Installation and Operation

Is it difficult to install Vulcan in my home?

Vulcan is designed as a do-it-yourself product. It sits outside the pipe and you do not need to cut into the pipe. The installation is very easy and takes approx. 10 minutes. No tools required.

How do I know which Vulcan size is needed for my application?

Please check the pipe diameter in the area where you want to install Vulcan. Then choose the unit that is designed for this size.

Where should I install Vulcan in my home?

Vulcan is mounted on the outside of the pipe with no need to cut the pipe. It should be installed at the point where the incoming water supply line is going into the house. Most of the time this is close to the water meter. This way, a single Vulcan treats all the water pipes in the house. European homes usually have a basement, so the main water pipe sits somewhere there, inside the house. Many homes allow access only outside the house. This again is usually where the water meter is located. Vulcan is a waterproof unit suitable for outdoor installation. We also offer a range of additional features such as a solar power charger in case there is no power supply nearby.

How do I know that the Vulcan is operating efficiently?

Red pilot lights at the impulse band outputs indicate that the impulse generator is operating efficiently. In the event these lights are not illuminated, please check you have the correct power supply voltage or contact Waslix.

Which voltage ranges are suitable for the electronic power supply unit?

All Vulcan power supply units are suitable for voltage ranges between 87 Volt – 260 Volt and 50 Hz – 60 Hz. It caters easily to all international power plugs. We are glad to supply you with the correct power supply unit in case of an international relocation.

How many units do I need?

Private homes are taken care of with one unit that treats the whole house. In larger buildings or industrial settings it depends. Typically, one larger unit gets installed on the incoming water supply line to the building. If you have a cooling tower or closed loop systems, another smaller unit would go there.

What are the power costs of Vulcan per year?

Vulcan is completely maintenance-free. The cost of electric energy per year amounts to approximately $5-7.

---

Miscellaneous

What kind of warranty do I get on Vulcan?

Vulcan has a full 10-year warranty and has a 30+ year life span. It is German TÜV-certified and is CE, CUL and UL listed. Your Vulcan unit is 100% covered under most circumstances. The units have an expected life of over 30 years and are imbedded in weather proof acrylic casts. By purchasing from Waslix your warranty is well-assured. German quality standards and excellent customer service have been our priority for over 60 years.

I heard of similar products which don‘t work. Can you explain?

There are similar products to Vulcan on the market that claim to do the job, but don‘t. Almost all other products on the market are working with inductive (electromagnetic) technologies. You can easily recognize them by their cables. Those cables run in a loop from the electronic unit - to the pipe
and back into the unit.

In comparison, Vulcan works exclusively with capacitive impulses that guarantee a stable output. Its impulse bands end on the pipes, similar to antennas.

Furthermore, regardless of inductive or capacitive impulses: Vulcan utilizes far wider frequencies of 3,000 - 32,000 Hz (= 3-32 kHz) and operates with energy levels at 24V. The product specialization in this field began in 1977 and we are constantly developing new technologies.